Imagine… You have been flying your learner drone since Christmas, and you are ready for the next step. A nice GPS enabled drone to take great pictures is on the short list… You could of course get a brand spanking new one, but what if funds don’t stretch that far?
For some reason some camera’s on the DJI Phantom 3’s are not properly focussed. This will result in blurry pictures and video. This is how your footage can look when your camera is somewhat out of focus. There is a fix, but that will require you to take apart your
Calibrating the gimbal is very important because it makes sure that the IMU in the gimbal knows what is level and adjusts the camera to that. If you notice that your horizon is off (not straight) when you are flying a gimbal calibration might help a lot. This is very
Do you, or do you know someone that has a 3d printer? and do you want a great fitting lock for your Phantom 3? Then you can download the .stl file on this page to get one yourself as well. It is a great fit! Click here to download the
The UpAir is a great drone, but it only has a 2 axis gimbal, It would be even better when it had a 3 axis gimbal. Good news, that is possible!! Get yourself a Storm32 3 axis Gimbal (get one here if you like) And a Firefly 6S camera (Get
If you want to calibrate your UpAir Camera (as described here) but you can’t get it done because the PID settings are too difficult, or maybe you have reset all the settings. Then I have my file right here. These are my settings, and I have spent well over an
Today I have received my new gimbal dampers. After replacing them I took them for a test flight. I am very happy with them, and I have lost my last little vibration that I always had in my video’s. The dampers were only €2,13 at AliExpress, and you can get them
In this post I want to show you how to change the gimbal dampers. For this post I am using a UpAir One v3 drone, but replacing the dampers is the same in general. The reason why I am changing the dampers is that I had a little crash not so long