Imagine… You have been flying your learner drone since Christmas, and you are ready for the next step. A nice GPS enabled drone to take great pictures is on the short list… You could of course get a brand spanking new one, but what if funds don’t stretch that far?
A great new way of making photo’s is using the 360 function. Litchi had this function for a while, but now it is also available on the DJO Go 4 app. make sure you have the latest update of the app, and that your drone is running the latest firmware,
Calibrating your controller is also important to do at times. You might notice jerky movements when jawing, or a slight drift to a side. drifting might also be caused by a bad IMU, check that first! this is how to calibrate the IMU But when you are sure the IMU
Calibrating the gimbal is very important because it makes sure that the IMU in the gimbal knows what is level and adjusts the camera to that. If you notice that your horizon is off (not straight) when you are flying a gimbal calibration might help a lot. This is very
Sometimes it is needed to calibrate your IMU. First, let me explain what an IMU is: An IMU is a unit which collects angular velocity and linear acceleration data and contains two separate sensors. The first sensor is the accelerometer. This generates three signals describing the accelerations along each of its
The easiest way to create your panos or timelapse! DJI Media maker does the job for you so you can concentrate on other things. Download link is below this article, both Mac and Windows You can set your DJI drone to do a timed shot. This means that the drone
Do you have a DJI Mavic, and do you have, or know someone that has a Silhouette Cameo, and you’re thinking about skinning your Mavic? If you can answer YES to all of these questions, then you’re in the right place! Here you can download the skin cut file. I
When you have a lovely partner that owns a plotter, skinning your Mavic becomes a lot easier, and you can basically make everything you want. I have made it nice matte red, because I like matte, and it all turned out great! The plotter used is a Silhouette Cameo 3