Some DJI models like the Phantom 4 Pro have a HDMI out, that is an easy way to connect a TV or other display to the video feed. But what if you don’t have that? What if you don’t even have a DJI drone? And what if you want to
Category: DJI Phantom 3 Standard
Fix out of focus camera Phantom 3 standard
For some reason some camera’s on the DJI Phantom 3’s are not properly focussed. This will result in blurry pictures and video. This is how your footage can look when your camera is somewhat out of focus. There is a fix, but that will require you to take apart your
Calibrate the controller of a DJI drone
Calibrating your controller is also important to do at times. You might notice jerky movements when jawing, or a slight drift to a side. drifting might also be caused by a bad IMU, check that first! this is how to calibrate the IMU But when you are sure the IMU
Calibrate the gimbal of your DJI drone
Calibrating the gimbal is very important because it makes sure that the IMU in the gimbal knows what is level and adjusts the camera to that. If you notice that your horizon is off (not straight) when you are flying a gimbal calibration might help a lot. This is very
Calibrate the IMU in your DJI drone
Sometimes it is needed to calibrate your IMU. First, let me explain what an IMU is: An IMU is a unit which collects angular velocity and linear acceleration data and contains two separate sensors. The first sensor is the accelerometer. This generates three signals describing the accelerations along each of its
Stress crack repair Phantom 3 standard
I have been reading a lot about stress cracks in the body of the Phantom 3. There have been many, many posts about it, and there are also many different things in the market that all say they prevent cracks. I have been flying my Phantom 3 Standard a lot,
First flight with the latest DJI firmware 1.9.20 and DJI Go 3.1.12
DJI has been releasing firmware updates for the whole range of their drones, and they have also updated their apps. Today I have flown with the new update 1.9.20 and the latest DJI Go app 3.1.12 for DJI Phantom 3. These are the results… Bear in mind, I have flown
The infamous DJI Firmware update 1.9.20
The infamous update for the Phantom standard is here… it is labeled as 1.9.20 There were stories online about this update, and some of the stories were telling people that the updated prevented you from flying the drone normally, and that you would get height and distance limits of 30m
Parallel charging board for DJI Phantom 3
I have bought a parallel charger board from Banggood, and it works great. I can now charge all three batteries the same time, and faster than 1 at a time as well. It is available here: https://goo.gl/aCCtN7
Download Phantom 3 gimbal lock 3d file
Do you, or do you know someone that has a 3d printer? and do you want a great fitting lock for your Phantom 3? Then you can download the .stl file on this page to get one yourself as well. It is a great fit! Click here to download the
Phantom 3 standard magic power mod
The Phantom 3 Standard is a great drone! but it is a bit of a problem to fly it far away. One thing that helps is to get a cheap range extender (windsurfer) as explained here With that windsurfer you can get it as far as 1km, but then you
Phantom 3 aftermarket battery
*Update 02-jan-2018* We have all seen the cheap knockoffs of the original DJI battery for sale on the Chinese sites. I have read so many different things about them, and I thought I’d buy one myself to see how good or bad they really are. I have got mine from
Windsurfer for Phantom 3 Standard
I have read a lot about the simple windsurfer mod, and since my range was not great I thought ordering one couldn’t hurt. In the stories I have read, most of the people that have fitted one reached close to a mile/1600 meters, comparing that to my 400m with stock,