Sometimes it is needed to calibrate your IMU. First, let me explain what an IMU is: An IMU is a unit which collects angular velocity and linear acceleration data and contains two separate sensors. The first sensor is the accelerometer. This generates three signals describing the accelerations along each of its
Gten says that the V3 doesn’t need calibrating.. That might be true, but calibrating the compass is a good thing to do, and is very important as well in case of a RTL. If you use RTL and the compass orientation is not good you might get a fly away!
Do you have a DJI Mavic, and do you have, or know someone that has a Silhouette Cameo, and you’re thinking about skinning your Mavic? If you can answer YES to all of these questions, then you’re in the right place! Here you can download the skin cut file. I
Nothing is more frustrating than going out for a flight only to be limited in height and distance after an upgrade of the firmware of your drone. You are looking in your settings, and all of the settings look fine, still there is no way going further than 50m The
Download Here: (pdf) –> hubsan-x4-desire-h502e-manual
Download here (pdf)–> upair-one-v3-manual