GTen has an update for the UpAir One V4 that has a PX4 board fitted. this should help you fix problems with “No MAV Data” showing on your screen. The update is easy, but be 100% sure your UpAir is a V4 with a PX4 board, it will not work
Gten says that the V3 doesn’t need calibrating.. That might be true, but calibrating the compass is a good thing to do, and is very important as well in case of a RTL. If you use RTL and the compass orientation is not good you might get a fly away!
Yesterday digital images appeared of the UpAir 2. Today I want to present you the first, official photo of the UpAir 2. UpAir 2 is expected to go on sales september/october 2017 The specs are looking very promising! 3 Axis Gimbal Optical Positioning 3D + 4K Camera 1Km HD Wi-Fi
Not too long ago I have written about my battery mod. I have flown the mod 2 or 3 times, and the only successful one was the first ever flight. Back then I was happy with the results, not knowing what I know now. At an event in December I
Today I have received my new gimbal dampers. After replacing them I took them for a test flight. I am very happy with them, and I have lost my last little vibration that I always had in my video’s. The dampers were only €2,13 at AliExpress, and you can get them
UpAir did the same with the LEDs as DJI did, red in front, green in the back. I have swapped them around… Red is now rear, green is the front. It just makes more sense. Sorry for my horrible Phone camera..
As you might have read in my previous post I have had a hard landing with the UpAir. No major damage other than a damper that got lost in the grass. But, the UpAir had a minor deviation to the right and I wanted to know why. So i exposed the
Even though the UpAir One is a great drone out of the box, there are some ways to get even more fun out of it, and make it even that little bit better. We are able to increase flight times, calibrate compass, change functions from switches, calibrate gimbal and a
Even though all the stuff needed for the mod arrived over a week ago, I still haven’t had time, or the weather did not permit me to fly the mod and actually test it. But today the weather was good, I had some time, and batteries were charged and ready to
Today they have finally arrived, my new carbon fiber propellers! The weather doesn’t allow for it to get tested, but will soon post what they are like.
Many have heard and read about the FPV issues with the UpAir One drone. Some people take apart their expensive drone to do all kinds of mods to improve the feed, and the stability of it. they buy more powerful VTX modules and stick on antennas… But there is a
Although my thoughts on the thunder props are not that good, it still looks good in the air. Just a small video of the UpAir one hovering
Today I have reviewed the Thunder props that you can order with Banggood, the link is below. These props are designed for the DJI Phantom 3 and 4, but also fit on the UpAir One and UpAir Chase. These props are different from the original props, the design is different