Reset the ESC of an UpAir One

If for whatever reason one or more motors are not performing as they should, you could try to do a ESC reset. The ESC reset does exactly what it says, it resets the ESC’s in the drone, and supplies the same amount of power to all 4 of them. If you are planning to upgrade0

Upgrade motors in the UpAir

I have asked Gten what motors are fitted in the UpAir, and the answer was 2212 motors 920KV That made me start to think about the next mod on my UpAir. So I have ordered some red Racestar 2212 920KV motors from Banggood (LINK HERE) And it was time to take apart the drone.. again0

How to prevent fly aways

The one thing we fear the most are the moments our drone seems to get a mind of it’s own, and flies to a place never to be seen again… also called a flyaway! but did you know that flyaways are 9 out of 10 times caused by pilot error? If you have a drone0

UpAir One strobe mod

this is probably the coolest mod you can do to your UpAir. Adding strobes makes it look a lot better. I have bought 2 strobes from FLyTron, Click here for the strobes My idea was to retrofit them in the UpAir, and replace the rear LED’s First you need to open up the drone, and0

Auto Tune UpAir One

We all know that upAir is a great drone to tune and mod, and with this mod you can make it just that little bit better. *UPDATE* this has been done by a few people I know, and the results vary a lot. Please make sure you have a SCREENSHOT of the current settings. not0

How to set date and time on an UpAir One

This does not seem to work on the PLUS model Create a new text file called TIME.TXT (use CAPS) Put the file in the ROOT of your card Open the file and type YOUR current date and time in this format: YYYY.MM.DD HH:MM:SS so it would look something like this: 2017.03.05 16:40:00 Now save, and0

Firmware upgrade UpAir One V4 camera

It appears that there is a firmware update available for the UpAir One V4 camera board. This is the one that is mounted under the UpAir that has a PX4 board! You can check this by removing the battery, and look up inside the drone. It says UpAir and a number.. if it says PX40

How to calibrate UpAir One Plus compass

This is the sequence to calibrate the compass on an UpAir One Plus drone Only calibrate the compass when UPair APP or the status indicator prompt you to do so. 1-When the Status” YELLOW” shows on the APP, start the calibration. The status shows “BLUE” after successful calibration of the first position. 2.Then starts the 2nd0

USB Mod UpAir One V4 – PX4 board

When you have a PX4 board, you should try to use QGroundcontrol instead of Mission Planner. You can download it here Some people already found out that they don’t have an USB port inside the drone. That is right! This is the V4 UpAir One It seems like G10 have silently updated the boards to PX40